The-Next-Big-Thing-In-Sliding-Patio-Doors-Repair-d

Sliding Patio Doors Repair

Sliding patio doors are ideal for enjoying your outdoor space, however they can be difficult to open and close. This can be due to various issues like dirty tracks or poorly aligned sliders.

Clean and lubricate your rollers. You can also adjust the rollers using the adjustment holes located on the bottom of the movable door panel.

Tracks that are damaged or dirty

A damaged or dirty track can cause a sliding door to not slide properly. Over time dirt, grit and even rust can build up, preventing the track from moving smoothly. A gentle detergent and brush can do the trick. It's best to perform this task on a regular basis to ensure the smooth operation of your door and avoid the need for costly repairs later on.

A leaking door can also be a common problem. It requires immediate attention to stop water damage, structural deterioration and the growth of mold. The issue is usually caused by worn weather stripping and misaligned door. This can be rectified by replacing the weather stripping and aligning the doors.

Rollers that bounce off the track are a problem that is often fixed with some simple DIY work. Find a friend to assist you with this task as the door could be heavy. Stand inside the house, and lean a panel toward you to reposition the rollers. When the panel is lifted off the bottom track, you'll need to set it on sawhorses to keep it from falling off. Then, loosen the roller's screws and pry them using a screwdriver. You can now clean any dirt that's stuck between the wheels and the tracks. Then, clean each wheel by rubbing denatured alcohol on a rug. Reposition the wheels to their tracks and then attach them once more.

If a portion of the track is bent, it might be possible to straighten it using a rubber mallet and block of wood. If the bent section is close to hinges or is likely to cause further damage, it's recommended to contact an expert.

Rollers that are misaligned

If your sliding door is sliding poorly it's because the roller wheels are not aligned with the track. The wheels could be dirty, rusted or their bearings have worn out. This friction causes the door to become snagged and grind when it's opened or closed. This can also result in squeaking sounds.

This is a straightforward fix. It is not necessary to take off the door to get at the wheels, as they are located on a bracket that is adjustable. Locate the holes for adjustment (usually on either side of the frame) and utilize a screwdriver for turning the screws that control the wheels. A clockwise rotation of the screw raises the wheel, while a counterclockwise rotation lowers it. Continue to adjust the door until it is open and shuts smoothly.

It is important to adjust the wheels prior making adjustments to the latch. To ensure that the lock functions correctly, the latch hooks must be aligned with the strike plate. If you do not do this the latch could open or close by accident while you are out of the room.

Sliding patio doors are a significant investment, and keeping them operating properly can keep your family safe and secure. You can prevent costly repairs by addressing common issues like faulty tracks, rollers, and handles. For more help with your patio doors, get in touch with our team. We can assist you in keeping your sliding patio doors in top condition by evaluating the repair requirements. Our experts are also able to assist with any replacement parts you might require.

Damaged or loosely held door frame

Sliding patios doors are a wonderful addition to any home. They are a practical and attractive alternative to swing-open or hinged doors for patios. Like other hardware items, sliding patio doors can become problematic in time. Fortunately, many of these issues are simple to fix with a bit of DIY know-how.





A common problem that affects sliding patio doors is a gap in the frame. It can be caused by a number factors, such as misaligned rollers or track as well as a damaged or damaged door track or bent door frame. In most cases, this problem can be easily fixed by taking the doors off and reattaching the track. This should be done with caution to avoid cause damage to the track or frame.

In some cases it may be necessary for the entire track to be replaced. This can be done easily using a universal kit, which is readily available at major hardware stores. These kits are easy to install and will get your door back to normal in a matter of minutes.

Regularly inspect the hardware of your sliding door and frame for signs of wear, like loose screws or bolts. These can often be tightened with a screwdriver, or wrench, making this an easy and efficient DIY patio door maintenance procedure. It is also crucial to oil the rollers and tracks of your patio door to ensure smooth operation and avoid premature wear.

Patio doors are often the primary entrance to the backyard and outdoor living space for a lot of homeowners. As such, they need to to function properly to ensure the safety of their homes and provide security. If you follow these easy DIY maintenance techniques, homeowners can prolong the life of their patio door and save money on repairs or replacements.

patio door renovation

Sliding patio doors provide the perfect way to access your backyard and to enter your home, but they can be difficult to operate if misaligned or damaged. A faulty handle may also cause the door to not open or close correctly. The good part is that repairing the handle that is loose is a fairly simple job that can be accomplished at home.

In many instances, a loose handle is simply the result of screws that have worked into the backplate. To remedy the issue, tighten the screws on the inside handle using a screwdriver. If you find that the handle is loose, it could be an indication that the threads have worn and need to be replaced.

Alternatively, a broken latch could be the cause. It is more likely the latch will break if it's made of metal instead of plastic. You can try applying lubrication to the latch if it is not catching, or turning. If not, you could require replacing the lock entirely.

If the handle is damaged or broken, it may be difficult to operate. If this is the case, it will be necessary to replace it with a brand new handle that matches the style of your sliding patio door.

If your patio doors are outdated and old or new, Feldco can help you get them back on the right track. We have doors of high-quality in a variety of sizes and styles that can be installed to fit your home perfectly. Contact us today to find out more about our products! We are proud to serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.

Afflicted Weatherstripping

If you're noticing light coming from closed doors and windows or feel a draft pushing against the door or window It's time to change your weather stripping. The strips form a tight seal that prevents insects, air, and water from getting inside your home. This helps keep your heated and conditioned air inside, saving money on energy costs.

It could have lost its positive seal, bouncy, due to aging. It is easy to determine this by running a dollar bill under the seal on the top and bottom of the jamb as well as door frame where they overlap. If the dollar bill slides easily between the seal and the door, it's time to replace the weather stripping.

If you only replace the worn-out part of the weather stripping, it could cause future problems with the seal. It's much more efficient to replace all the stripping. This will let you rest assured that your door will be properly sealed.

Follow our DIY guide to weather stripping and install the correct material for your sliding patio door and frame, to ensure a tight and long-lasting seal. This is a great opportunity for you to save money on your energy bills and repair your sliding patio door. Don't wait until it's too late. You'll reduce your expenses and enhance the look of your home.