Solutions-To-Problems-With-Fireplace-Electric-Logs-b

Fireplace Electric Logs

Contrary to traditional wood fireplaces which require expensive construction and messy cleanup of ash electric logs can add an ambience and look without the hassle. They're easy to install and can be operated with or without heat.

An electric log set is made up of a swathe of man-made logs that have been painted and placed on an iron grate. Connect them to an outlet and the heater built-in will blow warm air into your fireplace.

Realistic Flames

The effects of flames have improved as the electric fireplace industry has grown. A lot of people are unable to tell the difference between an electric fireplace from a real gas or wood fire. There are a variety of flame effects available, including LED lighting projections as well as water vapor. Each kind of flame effect has its own pros and disadvantages.

One of the most realistic types of flames is created by MagikFlame. This system is employed by Dimplex and has an elongated cylinder that rotates with mirror-like tabs that reflect colored LED lights. The result is an authentic flame silhouette against an unlit background. Other companies also use the same technology. It is important to note that the reflective surface will accumulate dust and dirt over time, which may reduce its effectiveness.

Another kind of flame effect is a chemical fire. It is created using an incinerator of Sterno fuel to create a mesmerizing flame effect. The flame, however, rises from a single point, and lacks the chaotic appearance of the natural flame. This type of flame requires a constant fuel supply, which can be messy.

A third type of flame is a fogger that produces water vapor. This can give a stunning look, but it can be messy and difficult for the user to maintain. It is important to use distilled or filtered water because the fogger's small holes are prone to becoming blocked with minerals and calcium from hard water. fireplacesandstove can be noisy and disturb the peace of your home.

The ember bed, though crucial for a real fire, is also vital. The ember bed reflects flames and can be constructed out of anything, including real coal, logs or even futuristic metal pipes. Some manufacturers even provide an array of faux stone options for the ember bed.

Installing an insert into your fireplace is one of the best ways to create a more natural-looking fireplace. This is more expensive than a set of logs, but can provide a more customizable and realistic appearance. The heater inside the insert will keep you warm without an additional log burner.

No Heat

Electric fireplace logs give you the warmth of a fireplace without the heat. The electric fireplace logs can be connected directly into an existing fireplace or masonry opening. They come with a remote to switch between different settings. There are many options for the logs and fire, including a modern option that resembles real wood, but gives the illusion of flickering fires over bark chips. There are also options that have antique brass accents for homeowners who prefer a more traditional appearance.

Electric fire logs can be a great alternative to gas fireplaces. Instead of having to have a gas line or venting, they plug into any standard wall outlet. They can generate 5 000 BTUs, which is enough to provide heat to the average-sized room. They also consume very little power which makes them an ideal choice for homes with a limited space or budget.

The best way to ensure that the electric fireplace log operating in good condition is to maintain it regularly. This could include cleaning, replacing parts as necessary and adherence to manufacturer instructions for safe operation. Deodorizers can help reduce the smoke smell.

There are several reasons that can cause an electric fireplace to not heat The most common issue is the heating element that is not working properly. They are the ones responsible for generating the warmth that creates the illusion of a real flame, however, they are prone to wear out and fail in time. Inaccuracies in the thermostat and other problems with temperature control could result in no heat.

Some electric fireplaces have a misting system which sprays water on the ember bed to create a steamy appearance. This is particularly useful during winter, when it's dry and cold. It can also provide a relaxing ambience all year long.

The only other thing that is required for an electric log set aside from replacing the logs as well as the ember bed, is to upgrade its power supply. This can be accomplished by replacing the old cord with a more long or more powerful one or replacing it completely. To avoid damaging other components, it is essential to select a replacement cable that matches the quality of the original.

Easy to Install

You can choose from a variety of electric logs that can be incorporated into your fireplace that is already masonry. These can be plugged in and switched on for instant ambiance. These units are usually affordable and provide a low-cost alternative to a traditional fireplace that requires a costly installation. They also don't produce dangerous emissions, so you won't have to worry about your home being smoky due to smoke or your furniture turning yellow from smoke staining.

Electric log sets consist of an assortment of man-made logs on top of a metal grates that can be installed in your existing fireplace. These units are plug-in to an outlet of standard size, give the illusion of flames using regular light bulbs. They also make use of technology that scatters light in three-dimensional patterns. They typically produce about 5500 BTUs, which can provide additional heat for up 400 square feet of space.

The logs can be moved to alter the look of the flames. Additionally, some models have a convenient remote that lets you control the flame's heat, height, intensity and the color of the ember bed. Some models also have a timer which can be set to turn the logs off and on for a specific amount of time.

You can choose between a log-only version and one with a heater unit at the center of the fireplace logs. The heater versions are great for use throughout the year, as they don't require the user to cut wood or clean up ash. They're usually less expensive than a fireplace with a wood burner, and they can be set up in an hour or less even by someone who doesn't know how to build a real fire.

Unlike gas and wood fireplaces, which require special ventilation, electric fireplaces do not. They only produce warm air and do not emit dangerous fumes that can irritate your nose and throat. It's easy to use. You can either turn them on to be awestruck by the flickering flames or press a switch to turn on the heater. You can even switch them to a flame only mode for summertime entertaining when you're looking for a bit of ambiance but no heat.

Style Options

Electric logs and inserts are a low-maintenance and affordable option for homeowners who want to have the appearance of a fire, but don't want the difficulty of burning wood. Electric fireplaces do not produce smoke or soot unlike gas log sets that require venting and gas pipes. Plus, most options can be controlled by an electronic remote, making it easy to switch on the fire and control the flames and embers from any space.





There are a myriad of options, from modern designs with a angular frame to more traditional designs and sizes. Certain brands offer a variety of colors, from a cool blue hue to a vibrant red-orange glow. The flame's appearance can be modified. Some models project onto water vapor in order to create a 3D effect and others display the lively dance of changing colours that simulates glowing embers.

One of the simplest ways to upgrade an existing fireplace made of masonry is with the fireplace log set. They are a collection of man-made, painted logs on a metal grates which can be plugged into an existing wall outlet and placed within an existing chimney. A fan and heater in the unit blow warm air into the room while an LED "flame" is projected onto the back of a panel to create a realistic effect.

Another option is an electric fireplace insert that is designed to fit inside an existing chimney. They typically have an even more realistic look than log sets, and they can be connected to an outlet in the wall or wired into the electrical system by a qualified electrician. They can even be installed on a wall that is recessed to create a sleek, modern appearance.

Both are excellent alternatives to a gas fireplace that may require a chimney or venting system and be vulnerable to leaks from the chimney or inefficient heating. A log set or insert may be too large to fit into a smaller opening in a masonry fireplace. You will need to engage a professional to assess the space and create a custom surround around your existing hearth.