11-Methods-To-Redesign-Completely-Your-Repair-Patio-Door-Lock-c

How to Repair a Bad Patio Door Lock

A safe patio door is a crucial element of home security. It can be difficult when your door is difficult to lock.

In many instances, a locked that is not working is caused by misalignment or simple wear and tear. Lubricating the lock or adjusting its position can help to restore its function. If these solutions don't work, you can replace the mortise lock and handle.

Clean and Lubricate

Over time, dirt, dust and grime can make it difficult to open and close doors. Regular cleaning and lubrication will help prevent your security device becoming stiff or stuck. This will help you save money on repair bills and extend the longevity of your door.

In the beginning, you'll have to clean the lock the cylinder. To do this, use a spray bottle of penetrating oil, like WD-40. Spray a small amount of it into the keyhole and then move the key in and out to distribute the oil. Avoid using household solvents or other oils which could harm your locks. Make sure to spray a bit on the key itself as well.

After your lock cylinder is clean and lubricated, it's time to apply. You can apply a silicone spray or a dry lubricant such as graphite powder. Graphite is a durable lubricant that doesn't attract dust, unlike liquid fluids. It's an excellent choice for lubricating locks. Silicone sprays are able to endure temperatures of minus 0 degrees and are resistant to water. However, they may need multiple coats in order to be effective.

You can also use a de-icer spray specifically specially designed for cold weather. It will remove ice and frost on the lock mechanism. RepairMyWindowsAndDoors of sprays will allow your lock unlock and then re-lock more easily.

The climate will determine the frequency at which you should belubricating locks. A location near the coast will expose your door to salty air and lead to corrosion, and temperature changes can impact how well your lock works. The most common rule of thumb is to grease your locks at least twice a year, or more frequently if you reside in an area with extreme weather conditions. Lubricating your patio door locks can save money on repairs, and ensure that it continues to function in a good way for a long time.

Reposition the Lock Cylinder

If your patio door lock does not function properly, one or more of its components may be damaged or misaligned. Regular inspections and timely repairs of a broken lock on your patio door can stop further damage and increase the security of your doors. You can repair a patio door that is locked or unlocked by tightening loose screws, altering the lock mechanism or replacing the lock cylinder.

Begin by looking at the exterior and the inside of the lock to determine whether there are any indications of damage or misalignment. Patio door locks may expand or contract depending on the weather and could shift over time. This slight movement could cause the locking mechanism to not align properly and cause problems when opening or closing the door.

Then, look over the lock cylinder to find any obstructions in the keyway hole. If the lock is corroded or blocked, the cylinder can be difficult to open and may eventually cause damage to the pins of the lock, cams, or latch springs. If the cylinder is difficult to insert, you might be able of removing any obstructions using a pair of tweezers or a picklock. If the issue continues, you may have to remove the cylinder in order to locate the root of the issue.

If the lock cylinder has not been screwed to the body of the lock it can be removed by unscrewing the screw on the faceplate of cylinder. This screw will allow you to rotate the cylinder and may even help restore the proper alignment.

Examine the cylinder for a small tab that can move up and down with the key, typically towards the end. This little clip, also known as a "release tab" is what keeps the cylinder from sliding all the way into the lock body. A standard key will slide this tab back to release the cylinder and allow it to be removed and then reinserted.

If your lock cylinder has become stuck it is possible to restore alignment by rotating the cylinder until the latch bolt is engaged with the strike plate. The handle or knob may then be pushed and pulled back. Once you've restored the proper alignment, reassemble the lock and test its functioning. If your patio door lock isn't working it's likely that another component like the latch or latch spring needs to be replaced.

Lock the Screws

Over time, the use of regular temperatures, cold and hot weather dust, dirt and even dirt can wear down patio door locks. If they are not properly taken care of these delicate components can get worn out and cause your door to not lock properly. Fortunately, most lock issues are easily fixable with a few simple maintenance steps.





Clean the lock mechanism. Use a damp cloth to get rid of any dust or dirt that may be present. Then dry the parts thoroughly. After cleaning, a small amount of silicone-based lubricant will help keep the moving parts running smoothly and effectively. Avoid lubricants with oil bases because they may attract dust and debris, which can cause further problems.

Next, if your patio door has a foot lock that is secure be sure that the lock is aligned with the strike plate. In most cases this will require you to adjust the screws that secure your foot lock to the frame of the patio door. To adjust the footlock, loosen the screw with a Robertson screwdriver, and then gently push it upwards or downwards. After the adjustment is completed you can tighten the screw.

The most common problem when it comes to repairing patio door handles is the misalignment of the latch and strike plate. This can be caused by normal wear and tear, or the latch could be placed lower or higher than it is supposed to be.

Start by removing the handle, then identify the screws or bolts which hold it in place. Make sure you keep track of them as you will require them when installing the new handle. Remove the spindle that was in use and slide the new one into place on the inside of the door. Be sure that it is properly aligned with the holes in both the exterior and interior handle. Once the new spindle has been installed, reinstall the handles on the exterior and interior to ensure that they are properly aligned with the screws or bolts that hold them in place.

Close and lock the patio door after you have made any adjustments that are required. If everything is in proper alignment, the door will open and close without additional force. If you're still having trouble, you might need to reposition the strike plate or latch, or the lock's cylinder might be damaged and require to be replaced.

Replace the Latch

If your patio door locks don't work, it may be time to replace the latch. The majority of homeowners can replace locks themselves. Start by sliding the patio doors completely out and then removing your existing lock on the interior of the door. Be sure to study the way in which the current lock is screwed to the door and the door jamb so that you can discern the kind of lock you'll have to purchase.

Before you install the new latch, loosen the screws securing the strike plate (the part of the lock that's mounted on the outside of the door frame) and adjust it vertically or horizontally to align it with the hole in the jamb in the door. After you've repositioned the latch plate you can tighten the screws, then screw it in place.

Once all the components of your patio door are repositioned or replaced, reassemble and secure them as directed by the manufacturer. After you're done, test the latch to ensure that it fits and is able to catch the latch hasp when the door is closed. If it does, then your patio door lock has been installed correctly and is able to give you the security and privacy that you have come to expect.

Patio doors, like other parts of your house must be aligned properly to work efficiently. Over time, cold and hot weather dirt and debris and other elements can cause hinges, door frame and the locking mechanism to shift. If these components are not aligned it's like trying to fit a key into the wrong keyhole it won't work. You can solve a problem which seemed impossible by following these easy steps. So go ahead and give yourself an ovation for tackling this task and regaining your patio door's lock position! We bet that you won't experience any problems opening or closing your patio door. Have fun! We're here if you have any concerns or questions.