12-Companies-Leading-The-Way-In-Patio-Door-Repairs-m

Tilt and Slide Patio Door Repairs

A well-functioning tilt and slide patio door provides light, fresh air and easy movement between indoors and outdoor. Modern aluminium doors provide durability and strength as well as thermal sturdiness, and various glass options to fit an array of styles.

Dirty tracks and rollers are the most common reason for sliding door issues. Regularly cleaning and lubricating the moving parts will keep your sliding door in good order.

Track and Roller Replacement

Track and rollers are the principal components of sliding door functionality. They are located in the bottom of the door's aluminum panel and are mounted on a track that helps them open and close. Over time, dirt accumulation in the tracks can cause them to get blocked. This can lead to the rollers becoming damaged. Keep your patio door clean and lubricated to prevent these problems.

Unless the track is badly bent, it's usually possible to fix the track and rollers without taking the door off. You can ask a relative to help you lift the panel off the track by tilting it toward you (Photo 3). This could take some effort because the panels can be heavy. Once the panel is removed place it flat on sawhorses and inspect the rollers. If they're damaged replace them with a new assembly. You can adjust the rollers' height by turning the adjustment screws, which are typically located in slots on the edges of the panel.

If the rollers look in good condition they may just require to be cleaned and lubricated. Remove the rollers using a screwdriver and wash them with denatured alcohol. This will eliminate any dirt or grime that could be causing resistance. Then, carefully position each roller back into its slot and fully retract it by using the adjustment screw. Lastly, lubricate the rollers using a silicone spray. This type of lubricant doesn't retain dirt as petroleum-based products do and will let your door glide smoothly.

After cleaning the rollers and installing them, you can install the door and check it to ensure that the track is aligned with the rollers and the doors are smoothly sliding. If you experience any other issues, you can contact an expert in your area for assistance. Keep patio door repairs near me and lubricated to extend their life and reduce the need for repair. We recommend a silicone lubricant because it doesn't attract dirt like WD-40. It is recommended to grease your tracks and rollers at least once a month.

Replace insect screens

Sliding patio door are great to maximize floor space, create airflow and let in stunning panoramic views. However, they can be troublesome if the mechanism stops functioning or isn't working correctly. The majority of sliding screen door issues can be fixed easily. Dirty rollers caused by debris in the track or a wrinkled screen are the most common causes, but you can usually solve them by following these simple steps.

If your screen is looking sagging, or wrinkled, you can place a 1x4 underneath each end of the frame to create an incline in the middle. This will help to pull the screen tighter and straighten it.

Be sure to buy a replacement screen that is at least a couple of inches bigger than the frame opening in both directions. You'll be able trim any excess. Also make use of a spline roller tool to press the rubber spline's edge into the channel. After you've done this, it's time to roll the rest of the spline in.

Adjusting the Panel

The tilt and slide mechanism lets you widen the patio doors for ventilation, while keeping your children, pets, and other household members away. Despite the convenience of the system, they tend to require more force than they are expected to and over time, this causes increased friction, crooked tracks, or misalignments that could cause the door to fail. Identifying these problems early and performing minor adjustments can often fix them, reducing the necessity for costly replacement hardware.

The first step for adjust a tilt-and-slide patio door is removing the panel. Place it on an uncluttered surface. After removing the panels make use of a screwdriver to remove the plastic caps from the holes of each adjustment roller. Once these are removed, the adjuster can be pulled out of its channel by using a long shaft screwdriver. Once the adjuster is removed from its channel, place it on an even surface and scrub it with rubbing alcohol or a stronger alternative like denatured alcohol. This will get rid of any dirt that causes the roller to become resistant and let it easily retract back into its channel following the process.

When reinstalling a movable panel align it with the frame and then use the drill to drive the screws into the flange. The flange needs to be secured tightly to the door's edge while making sure the flaps are oriented correctly. After the movable panel has been put in position, apply a blob of silicone-based lubricant on the top track arm connector block, the lead Bogie wheel, and the slave Bogie wheel, and then replace the plastic cap on the hole.

Repeat the procedure for the remaining two panels that can be moved to restore their slide function. Reinstall the flanges made of plastic. Utilizing a plastic adhesive glue the jamb-side strip onto its respective fixed panel. Once the glue is dry reconnect the handle and check for smooth operation. If you find any issues, adjust the lead Bogie wheel by removing it from its channel, cleaning and installing it again with a small amount of silicone-based grease.

Charley Bar Installation

A patio door can be an ideal way to let your pet in and out of your home, but it is also an entry point for burglars. You can take steps to increase the security of your patio door by putting in a pin lock or an charley bar. These devices offer a mix of convenience, security and ease that is unmatched in the market.

The charley bar is an excellent option for your sliding glass door, and can be easily installed at your home. The charley bar is installed in the center of your door and stops the patio door from being jimmied open with tools or other items, such as the hockey stick or broom handle. The charley bar is constructed of injection-molded polycarbonate and extruded RPVC Telescoping tubes making it tough and durable.





The installation of the charley bar requires that you first determine the length of the bar from the edge of the track for sliding doors to the sliding patio door. Then, you can mark the points where the charley bar will go using pencil. Use an eighth-inch bit to drill holes in the wall jambs and patio door frames Be careful not to damage the glass of the patio doors. Finally, place the screws included with the charley bar and tighten them securely.

The Charley bar is a great choice for your sliding glass patio doors as well as sash windows. This simple security device keeps your sliding patio door tamperproof and burglar-proof for many years to come. It is made of injection-molded polycarbonate, and it has been tested by Intertek to withstand over 400 pounds of pressure. In addition the charley bar can be locked with the key that comes with it. It is easy-to-install and stays out of the way when it's not being used. You can purchase a charley bar from most hardware stores. If you want a charley-bar that will work, buy it from an online retailer.