16-MustFollow-Facebook-Pages-To-Fiat-500-Replacement-Key-FobRelated-Businesses-x

Add a Sparkle to Your Fiat 500 Key Fob





Add a little fun to your Fiat 500 Key Fob with these adorable silicone covers. They're simple to install and snap in place of the original black cover.

The silicone covers guard the keys from splashes, dust and other contaminates. The silicone covers also make your keys appear more elegant. The signals from the remote control are not affected and work even when the cover is in place.

Protect your key from splashes, dust, and other contaminants.

Add a little flair to your key with this silicone cover. It perfectly fits around the key fob and isn't slipping. It also protects your key from dust and splashes. The silicone cover won't interfere with the signals sent by your key remote, which means you can use the keys fob buttons as usual.

Accessorize your Fiat 500 in Grey or Black with these cool covers. These covers are great for those who have their original cover looking a bit damaged, scratched, or scratched. The covers are made of premium silicone and come with 2 key rings, so you can swap them out if you get bored with the same colour.

These covers are designed to replace the stock black key cover that comes with your vehicle. These covers will not fit when you have the original key cover installed.

Great look!

Fiat are a truly unique and well-known Italian brand, and their cars have a great design that distinguishes them from other brands. These stylish car key covers are an easy and enjoyable way to add a little sparkle to your keys without being too overwhelming. They look great on your key fob, and can be used to revive the look of a worn-out key.

These covers snap easily into the desired position and are designed to replace your black cover. It is recommended to take off the old cover prior to installing this.

The Fiat logo can be seen in both Grey and black. You can change the colors at any time! These are also great presents for Fiat 500 drivers.

Easy to install

Fiat 500 key covers are an easy way to freshen your car keys. You can pick from a range of styles and colors to find one that matches your personality. Install them yourself in ten minutes. You'll need a screwdriver and some patience. The first step is removing the cover that was originally installed. The original cover needs to be removed before the new one cover can be put in place.

Once you have removed the old cover, use a flathead screwdriver to pull out the four main attachment clips located on the passenger side of the fob assembly. These are marked with red on the photo below. Also, note the tabs for locating slots that are highlighted in yellow. They must be removed also.

Replace the battery with a # CR2032 coin cell battery. Make sure that the "+" positive side of the battery is aligned to the opening on the fob, and that the -" negative side is facing towards the buttons made of rubber.

Reattach fiat 500 spare key cost uk by aligning the tabs that locate it. After you've completed this, insert the fob on the driver's side in your car and test it by pressing the button on the front of the car key. If everything is working correctly, the parking lights should be activated and the doors will automatically close.

Easy to remove

Fiat 500 Key Covers are a great option to refresh your key fob. They're easy to set up and give a unique look. They shield your key fob from dirt, scratches and smudges. To replace the cover, you first have to take off the old one from your vehicle.

It is easy to accomplish this by pressing the "Fiat" red button on the front of your key fob. By pressing the button, the lever will be released which lets you remove the ignition switch made of steel (1). After you've removed the metal keys, you will find a small silver switch that displays images of a padlock locked and unlocked beside it. This is the key fob battery switch. The battery is simple to replace by turning the switch a quarter turn using a tiny screwdriver with a flathead.

The key fob has an embedded microchip that communicates with the Body Control Module. When you insert your Fiat key it presses a button on the ignition switch. This is used to remind you of the "key-inignition". The BCM will scan the transponder on the key fob to verify that it is valid.

You can also get the twin pack of sport design for a fun, unique style to your key covers. These covers snap in place over the original cover. They are available in Cream and Silver. The key cover only works by removing the black cover from your key fob.