5-Sliding-Patio-Door-Repair-Lessons-From-The-Pros-f
Sliding Patio Door Repairs
A sliding patio door is a wonderful option to let more natural light in and let you enjoy your outdoor space. If the door isn't moving smoothly or appears dingy, it can be a pain.
Fortunately, most of these issues can be fixed with a bit of DIY expertise. Here are a few of the most common issues and their solutions.
Dirty or damaged tracks
Over time, a sliding patio door's tracks could be clogged with dirt, dust and other debris. A regular cleaning routine and lubrication will help to ensure that your door will move smoothly.
A dirty track can make the door stick or even make it impossible to open or close, so the first thing you need to clean it. Start by removing any debris that has fallen off using a broom. Use the brush and cleaning solution to scrub away any visible dirt. Be sure to clean all corners and nooks and also the areas where the door joins its frame.
After patio door repair scrubbed it, wash the track using a hose or bucket of clean water. Finally, apply a store-bought lubricant that will eliminate moisture and prevent further corrosion. Test the door by sliding it backwards and forwards to determine if it is able to move it freely.
If your door continues to stick, it could be that the rollers have been damaged or misaligned. This could cause the door to move slower. In the majority of cases, you can fix it by moving the wheels and lubricating. It may be time to replace the door if your door is old. Before reassembling the track, lay down a drop cloth on the floor. Remove the two plugs that cover the roller adjustment screws found at the bottom of frame. Put a screwdriver into each hole and turn them counterclockwise to retract the rollers. This will give you enough space to remove the door from the sawhorses, and put it back on the sawhorses.
Handle is not working properly
Over time the handle on your sliding door can loosen from the strike plate it hangs on. The good thing is that a loose handle can be easily fixed. Use a screwdriver and tighten the screws that connect the door handle in place to the strike plate. Be careful not to over tighten as this could cause damage to the mechanism inside, causing the handle to not function properly.
When a sliding patio door becomes difficult to slide, the problem is usually caused by debris clogging the rollers. Hair, dirt and other messes frequently get stuck in the tracks which makes the door stop smoothly sliding. Clean the rollers and using a sliding door lubricant that will ensure smooth operation.
A common problem is when the sliding patio door lock no longer is working. This could be caused by a misaligned lock or the handle is damaged. The lock mechanism could be replaced or the handle re-aligned.
A screen door that won’t close or unlock is not an enjoyable experience. A faulty screen can be dangerous. If the screen isn't aligned properly with the door frame it will rub against the frames and result in wear and tear on both the screen as well as the door. The solution to screen that isn't working properly is pretty simple. First, make sure whether the rod that holds it is still in the correct position. If not, take it off and replace it with a new one. Once you've replaced your rod that latches, put it back on the screen, and ensure the hinges are set properly. Add screw covers to the holes of the frame for a neat appearance.
Faulty Weatherstripping
The weather stripping seals the gap between your frame and door, preventing drafts, cold and pests. It's time to replace it if it is cracked, discoloured or hardened. It's generally fairly simple to do. Some people replace only the worn part, but it's much easier to replace the entire piece.
First, check that there isn't a gap near the seat where the weather strip is attached to the frame. If so, patio door repairs will need to reseal the weather strip to the frame using the weather strip adhesive.
Then, look around the perimeter of your weather strip. Utilize a dollar bill to verify if the weather strip is sealed. Simply place the bill half way across the seal and close the door to see whether it is able to pull away from the metal flange of the weather strip. If it is easy to remove, it's time to replace the weather strip.
You may require lubrication of your run channel (the groove made of felt and rubber on both sides of the door) in order to prevent the build-up of ice in winter. You can purchase a spray lubricant at your local hardware store. Be careful not to get it on the glass.
Spreading a thin layer of sand underneath your door will prevent it from sticking, much as salt. Don't leave sand on the lower part of your door since it could damage the rubber and concrete of the weather strip.
Damaged Glass
There are a myriad of circumstances that can lead to the glass of a sliding patio door becoming cracked or shattered. If it's caused by a knock or a bump or a bump, if the glass on your patio door is damaged, it is important to replace it as soon as possible to ensure that your home is sealed and is properly insulated.
Over time, sliding doors are prone to damage due to regular use and exposure to elements. Patio doors that are not functioning properly could be caused by rusty rollers, damaged handles or bent tracks. Repair experts for sliding patio doors are able to quickly identify the root of the issue and fix any issues or replacements.
A damaged patio door could impact your energy bills in addition to the obvious damage. Temperature fluctuations and drafts around the patio door are typically indications that there is a gap present between the door frame and the glass. This is costly in both the winter and summer seasons when you have to pay to cool or heat your home.
It is possible to replace damaged glass panels on your sliding patio door without having to take out the entire door. In some cases this is the best choice if you are looking to get your door back functioning as soon as you can. No matter if you are replacing the glass or the frame, it's essential to have all of the necessary tools available to ensure that the task can be done safely and efficiently. This includes gloves as well as a small hammer, pry bar as well as a putty knife and a measuring tool and replacement glass. DIY Door Store has all of these materials available to help you easily and affordably fix your own broken sliding patio door.
Frames that are damaged or loose.
Sliding patio doors are designed to facilitate easy indoor-outdoor movement and provide a natural flow. As with all home appliances sliding patio doors are subject to wear and tear that may impact their performance. Certain damage are simple to repair, but others require expert assistance to keep your door in good condition.
The visible signs of damage such as dents and scratches suggest it's time to consider sliding door replacement. These damages not only reduce the appearance of your patio doors, but they also impact security and energy efficiency.
Misaligned track or rollers are common problems that cause your sliding door to not function correctly. This is usually due to debris or dirt getting stuck on the track. You can solve this issue by using pliers to straighten the rails.
Cleaning the tracks and rollers on your sliding patio doors is essential. Dirt can cause them to become stiff or stuck, preventing them from moving smoothly. Using a hand brush or vacuum cleaner, or a spray-down that includes jet washing can assist in clearing any obstructions. Adding a silicone-based lubricant to your tracks will help to facilitate smooth operation and protect against premature wear.
In time, slamming the door of the patio can cause serious damages to the frame as well as the glass panel. This can result in broken or loose frames as well as bent tracks and a handle that becomes difficult to open and close. Sliding screen door frames are usually less durable than those of glass sliding doors, which makes them more susceptible to damage. If you've damaged your frame for your screen door it can be fixed by resealing with silicone lubricant, then applying a new sealant around the glass perimeter.
