7-Simple-Tricks-To-Totally-Intoxicating-Your-Patio-Doors-Repairs-n

Sliding Patio Doors Repairs

Your sliding glass patio doors help bring natural light and improve your home's energy efficiency. However, as time passes, they can show signs of wear and tear, which will require some maintenance.

Most sliding patio door problems are fairly simple to fix. Find out how you can keep your sliding patio doors looking and functioning like new.

Dirty or Damaged Tracks

The tracks of your sliding patio door could be dirty or clogged. Over time, the dust and grime of daily use build up on the track and can cause the door to become jammed or even fall apart completely.

Including regular light cleaning of sliding doors and their tracks in your household chores can help reduce the build-up. Start by brushing or vacuuming large pieces of debris off the tracks. Then, use warm water and non-abrasive cleaning products, such as dish soap, to clean them. Vinegar can be added to your cleaning solution to help remove stubborn grease and dirt staining.

If your sliding door doesn't move smoothly after completing these steps, it could be an indication of more serious damage that requires a professional repair or replacement. However, there are many easy fixes you can try before calling in the experts to prevent costly repairs or replacements.

It's important to place a doormat near the bottom of your sliding doors to catch dirt before it has a chance to get to the tracks. Regularly trim any plants or bushes that are in close proximity to your sliding door to reduce the amount of debris that is tracked into the tracks. Close the door correctly to avoid damaging the rollers and wheels. You can increase the lifespan of your doors by keeping them clean and lubricated.

Misaligned Rollers

Sometimes, a sliding patio could be misaligned. Usually, this is due to obstructions or dirt which can be easily removed. Sometimes, it's due to bent tracks or a bent roller. In the latter scenario it is possible to realign the roller by extracting them by using their adjustment screws and cleaning them with ruby alcohol. Be careful because these parts are fragile.

If your doors are sticking, you can lubricate the rollers. This will reduce friction and allow them to slide more easily. Make use of a silicone-based product since petroleum-based lubricants tend to draw dirt more quickly. It is also important to clean the tracks and rollers before applying lubricant.

After you've cleaned your rollers, you can reinstall them with the adjustment screws. It is recommended to use the same lubricant you used for cleaning them. Make sure you push the rollers completely in their channels when reinstalling them. Then, you can test your door to determine if it now slides effortlessly.

If the issue persists, it may be necessary to take the door off and check the tracks and rollers. If the wheels or tracks are bent in a way, you may need to replace them. It is recommended to hire an expert to install the rollers or tracks in this case.

Warped Glass

Sliding glass doors are convenient to bring in natural sunlight and the outdoors into a room, but they are also susceptible to damages that require repair or replacement. Warping, cracking, and fading are some of the most frequently encountered issues. The materials used to make the sliding glass patio doors begin to deteriorate when exposed to heat, sunlight and other environmental elements. The most common cause of cracking is the impact of a collision, for example from a ball or lawn mower run-in, and fading generally is caused by repeated contact with sunlight or other elements of nature.

If your sliding patio doors aren't easy to open or close, it could be a sign that the tracks and rollers are not functioning correctly. This issue could be caused by accumulated dirt or rust in the track or wheels or a lack or lubrication. This issue can be fixed by cleaning the rollers, tracks and removing obstructions.

The locking mechanism might also be defective and make it difficult to open or shut your sliding patio doors. This could be due to an issue with alignment or wear and tear, but a simple fix is to adjust the locking mechanisms by using the adjustment screws located on the bottom of the track.





Drafts or air leaks around your sliding patio door are a common problem that can reduce their energy efficiency. They are usually caused by damaged weather stripping and poor door alignment and can be easily corrected by replacing the old weather stripping and re-aligning the doors.

Loose Handle

It can be quite frustrating when the handle of a sliding door becomes loose. patio door repair becomes difficult to open. The reason for this is an improperly aligned lock mechanism. It can be fixed by loosing and tightening the screws holding it in place.

A loose handle can also be caused by the handle breaking off from the spindle connecting it to the inside or handles on the outside. This usually happens as a result of a variety of factors, including over use or wear and tear or simply aging. If the issue isn't addressed quickly, it could eventually lead to the entire handle becoming loose, and possibly falling off completely.

To solve this issue it is necessary to identify the screws that join the interior and exterior handles. These screws are usually hidden behind tabs made of plastic that can be removed with a flathead (or a Phillips head screwdriver, in some instances) screwdriver. Securely store these screws to ensure they don't get lost.

After removing the handles the next step will be to remove the spindle. This can be accomplished by tapping on the end with a mallet or hammer until it is free of its place inside the door. Then, the new handle can be installed by simply placing the spindle through the hole on the handle inside and placing the other end of the spindle through the hole in the exterior handle. Once the handle is in place it can be tightened by screwing the screws back into place and then testing to ensure that the lock and unlock mechanisms work properly.

Faulty weatherstripping

A damaged or cracked weatherstripping may allow air and water to seep through your patio doors, which can compromise the comfort and energy efficiency of your home. In addition to allowing water, it can also cause drafts and increase your cooling or heating costs. It is easy to replace damaged weatherstripping, even without the assistance of a professional. You can take off the old weatherstripping by loosing the staples using the help of a screwdriver or by gently squeezing it with the help of a putty blade, and then pulling it from the door. Clean the area, and then apply a layer of weatherstripping that is secured by an adhesive. This will prevent leaks and improve comfort.

If your sliding patio doors aren't operating as they should, it's crucial to take action immediately to prevent any further damage and ensure they remain in good condition for the long term. Depending on how serious the problem is the best option is it's possible to choose a DIY solution or a professional repair/replacement might be the best option.

The most frequent issues that arise that are encountered with sliding patio doors are filthy rollers caused by debris on the tracks, wheels that are not aligned and a loose handle. These issues can be resolved by regular maintenance and cleaning including changing the track's lubricant and adjust and tightening the hardware. If these steps fail, it's advisable to seek professional advice to ensure that your patio door is operating exactly as it should. Review the warranty information before you decide to repair or replace your patio door. This will save you money in the future for repairs and replacements.