Five-People-You-Should-Know-In-The-Sliding-Patio-Door-Repair-Industry-h

Sliding Patio Door Repair and Replacement

Sliding patio doors are a wonderful addition to any home. They are easy to operate and provide a wide view. Like any other household door they're susceptible to wear and tear that needs replacement or repair.

Make sure you regularly clean and lubricate your sliding patio doors to keep them in good working order. Lubricating them with graphite or silicone will allow them to slide smoothly, extending their lifespan.

Roller Replacement

If your sliding patio door isn't rolling easily, you may have to grease it. If the rollers are worn or damaged it is necessary to replace them. Replace your patio door rollers to ensure that your doors run smoothly. Also, you will require less force to open or close them.

If your patio door was manufactured prior to 2000, you may need to remove the bottom part of the frame to access the rollers. If this is the case, use a wood block and rubber mallet to tap the assembly free and then pull it out. Save the roller screws for reinstalling your new rollers.





Glass sliding doors are a significant security feature in many homes and should be properly protected. Old or damaged roller wheels can make your door difficult to open or close and can create gaps around the door that intruders can exploit. Replacing your patio door rollers ensures that your home is secure from uninvited guests.

After you have removed the top and bottom rails, it is a good idea to clean all the areas of the track using an alcohol-soaked cloth. This will get rid of any dirt which makes it easier to remove the doors from the track. The drainage holes on the bottom of the track should be clearly visible, but they are often clogged by dirt. If your track appears to be prone of collecting lots of dirt, you may think about installing a stainless steel u-shaped piece that snaps onto the track and creates an extra channel for water to flow through. They are available from CR Laurence, as well as other stores that specialize in sliding door parts.

When you reinstall the doors, remember to put the bottom panel in first, and then move the top into the position. You should be able test the doors after they are in their original position to make sure that they operate smoothly and do not require excessive force to open or shut. If they still feel rough, you could adjust the new rollers to allow them to move more freely.

Weather Strip Replacement

The weather strip seals on the sliding doors gradually get worn out, which allows drafts and moisture get in. This increases your energy costs. Replacing them is a straightforward project that takes only some minutes and will be paid for in lower heating costs in no time.

There are a myriad of materials for sliding door weather stripping, each having their own benefits and drawbacks. You'll need to choose a material which will be able to withstand the effects of friction, temperature fluctuations as well as changes in weather and foot traffic, while not interfering in the operation of the sliding door. Foam and felt, for instance are not expensive, but they are susceptible to weather and visible in the frame while vinyl is more expensive but will last for a long time; metals are durable but could look out of the frame of a modern home; and plastic or rubber may degrade over time and require frequent replacement.

To install new weather strips, take the door from the casing. To do this, look for the headstop on the top of the door. It's usually a small strip of plastic or metal that's held in place by screws. Remove the screw caps, and then use a flathead tool to pry out the headstop from bottom of your door. Remove the old weatherstripping and any remaining residue using scraper or a putty blade.

Don't try to pull the door off its track using just one person. You'll need to apply lots of force. You can have a partner hold the door while you take it off.

Locate the channels that hold your weather stripping. These should be covered with plugs that match the color of your doors. Pull the weatherstripping up to remove it from the channel. Take the plugs off.

There are many types of weather stripping that are available however the most suitable for sliding patio doors is Fin Seal. This kind of weather seal comes with a Mylar that is centered within the brush material. It is extremely robust. It can be used in all climates, and can endure the rigors of foot traffic. The back of the weather stripping is made from a hard and flexible material to better withstand the pressures of a sliding patio door.

Door Alignment

Sliding patio doors are a fantastic feature for any home, but as with other things, they will benefit from an occasional adjustment to make sure they are working at their best. As time passes, the parts of these doors will wear out or get out of alignment, resulting in issues like sticking, bumping into frames or not locking properly. Regular maintenance and minor adjustments can help prevent these issues, which will save you money and time.

The most common cause of sliding door misalignment comes from damage to the rollers or tracks caused by sudden jolts and excessive force. This issue can be resolved quickly with the right tools. Your patio door will continue to slide smoothly for many years.

Other causes of misalignment include variations in temperature or humidity, weatherstripping wear and tear and poor installation. Parts may shift and become loose over time. This can cause the door to move and then not latch or close properly. As time passes, these shifts could create air drafts, or even allow water to leak into the house.

It is essential to clean and lubricate the sliding patio door track on a regular basis to avoid these problems. A small amount of spray lubricant could easily be purchased at any hardware retailer and application often with a small amount of brush will keep the track running smooth.

Another reason for sliding patio door misalignment is that the latch hook is not synchronizing with the strike plate on the jamb. To correct this, open the door and reveal the latch mechanism. This will allow you to inspect it and have full access. Then, locate the adjusting screw that controls the latch hook, and gently rotate it in either direction to adjust its length. A properly adjusted latch hook will guarantee that the latch is able to hit and connects to the strike plate without any obstruction or resistance.

After you've made all the necessary adjustments, test the door to ensure it is sliding and locks correctly. Repeat the procedure if there are still any issues until your sliding patio doors is fully functional. You will save a lot of cash by not having to hire professionals to do expensive repairs.

Frame Replacement

Over time, the screws in sliding door frames may loosen. This can allow the frame to move a little. Checking and tightening the screws will prevent your doors from sticking or becoming jammed. A sliding screen door can be corrected with a little some clamping, but a loose hinge might require a replacement.

Replacing a sliding patio door, without replacing the frame is feasible, but it requires careful analysis of the condition of the existing frame. This option is less expensive than a complete frame replacement and can be a solution to particular needs like better insulation or a fresh look.

A full frame replacement is the complete removal of the existing hinged doors, window and frame from the wall opening. This allows a brand new sliding patio door to be built and offers more flexibility in design size, material and design.

Sliding glass doors are designed to give you a stunning view from your backyard. However, they do begin to show signs of wear and tear as time passes. If your sliding glass doors are difficult to open or stuck you may need to replace the track or wheels. However, if the frame is in good condition, replacing just the doors may be sufficient.

Before you begin, make sure your work space is free of obstructions and you've laid down a drop cloth. patio door repair is to lay the sliding door on a flat surface and remove any grilles or shades from the frame. Then, use a screwdriver to remove the plugs that are covering the screws that adjust the rollers at the bottom of the sliding door frame (they're usually covered with caps). Once you've removed the plugs then, you can unwind the bottom of the sliding door and pull it away from the track.

Once the frame is exposed, you can replace both the track and sliding door wheels. If your sliding door track has become old or damaged, you should replace it rather than repair it. You can purchase a kit for an DIY project or have an expert handle it for you. In either case, you must follow the instructions of the manufacturer to ensure the proper installation.