Patio-Doors-Repairs-Whats-The-Only-Thing-Nobody-Is-Talking-About-q

Sliding Patio Doors Repairs

Your sliding patio doors can bring the outdoors in to your home and increase the efficiency of your home's energy usage. However, as time passes, they could show signs of wear and tear that will require some attention.

Most sliding patio door problems are fairly easy to fix. Find out how you can keep your sliding patio doors looking and working like new.

Tracks that are damaged or dirty

One of the most common causes of sliding patio doors that do not open is clogged or dirty tracks. Over time, the dirt and grime of daily usage can accumulate on the track. This could cause the door jam to become damaged or break completely.

This buildup can be reduced by incorporating regular light cleaning of tracks and sliding doors during your regular chores. Begin by brushing or vacuuming any big debris from the tracks, and then wipe them clean with warm water and a non-abrasive cleaning product, such as dish soap. Vinegar can be added to your cleaning solution to remove stubborn grease and dirt stains.

If you find that your sliding door doesn't move smoothly after completing these steps, it may be a sign of more serious damage that requires professional repair or replacement. But, there are simple fixes that you can try before calling the experts to save on costly repairs or replacements.

It's important to place a doormat near the bottom of your sliding doors to help trap dirt before it has a chance to reach the tracks. You should also regularly cut back any bushes or plants close to your sliding doors in order to reduce the amount of debris trapped in the tracks. Close the door properly to ensure that you don't damage the rollers or wheels. You can extend the life of your doors by maintaining them clean and lubricated.

Misaligned Rollers

Occasionally, a sliding patio door can become unbalanced or becomes stuck. It is usually due to obstructions such as dirt or other which can be easily removed. But sometimes it can also be due to bent tracks or rollers. In this case you can re-align the rollers by taking them off by using the adjustment screws and cleaning with rubbing alcohol. These parts are prone to damage.

If your doors still stick, you can try using lubricants on the rollers to reduce friction and make it easier for them to slide. Choose a silicone-based lubricant, since petroleum-based lubricants tend to attract dirt more quickly. It is also important to clean the tracks and rollers prior to applying lubricant.

After cleaning the rollers, you can reinstall using the adjustment screws. Use the same lubricant that you used to clean them. When you are reinstalling the rollers ensure that you push them completely into their channels. You can test your door now and see if it glides smoothly.

If the problem continues, it is possible to take the door off and check the tracks and rollers. If the tracks or rollers are badly bent, they may need to be replaced. In such a case it's best to contact an expert to install the tracks.

Warped Glass

Sliding glass doors are ideal for bringing the outdoors into your home and letting in natural sunlight, but they may also be prone to damage that needs repair or replacement. Some of the most frequent issues that can occur are cracking, warping and fade. Warping occurs when the components that make up your sliding glass patio door begin to degrade due to sun, heat and other environmental elements. The most common cause of cracking is the impact of a collision, for example from a ball or lawn mower run-in, while fading usually is caused by repeated contact with sunlight and other natural elements.

If your sliding patio doors aren't easy to open or close it could be a sign that their rollers and tracks are not functioning correctly. This problem may be caused by accumulated dirt or rust on the track or wheels, or by a lack or lubrication. Cleaning the rollers and tracks clearing obstructions and applying silicone spray may aid in resolving this issue.

Another reason that sliding patio doors might be difficult to open or close is because the locking mechanism has become faulty. This could be caused by the alignment of the track or wear and tear, but a simple fix is to adjust the locking mechanism by turning the adjustment screws that are located in the bottom of the track.

Air leaks or drafts around your sliding patio doors are a typical problem that can drastically reduce their energy efficiency. These issues are typically caused by worn-out weather stripping or poor door alignment. This can be easily resolved by replacing the weather stripping, and re-aligning your doors.

Loose Handle

It can be a hassle when the handle of the sliding door is loose. It becomes difficult to open. This issue is usually caused by an incorrectly aligned locking mechanism which can be fixed by loosening the screws that hold it in place and then tightening them until they are snug against the door jamb.

Another reason that is commonly cited for a handle to become loose is that it is detached from the spindle that connects the interior and exterior handles. This can be the result of a number of factors, including frequent use, wear and tear or just general aging. If the issue isn't resolved promptly, it may eventually lead to the whole handle becoming loose and eventually falling off completely.





The most effective way to address this problem is by first locating the screws that attach the interior and exterior handles. patio door repairs near me are usually hidden behind tabs made of plastic which can be removed using a flathead (or a Phillips head screwdriver, in some instances) screwdriver. It's a good idea to keep these screws safe so that you don't lose them.

After removing the old handles then the next step would be to remove the spindle. This can be done by tapping the spindle with a mallet or hammer until it falls free from its position inside the door. The new handle is fitted by putting the spindle in the interior handle hole and the other end through the hole on the outside of the handle. Once the handle is in place, it can be tightened by screwing the screws back in and then ensuring that the locking and unlock mechanisms function correctly.

Afflicted Weatherstripping

A cracked or worn weatherstripping can allow air and water to get through your patio doors, compromising the comfort and energy efficiency of your home. In addition to allowing water, it can also cause drafts and increase your heating or cooling costs. It is good news that replacing damaged weatherstripping is a simple fix that doesn't require any professional help. You can remove the old weatherstripping by loosing the staples with the help of a screwdriver or by gently prying it with a putty blade and then pulling it from the door. You can then clean the area, and then apply an additional layer of weatherstripping that is secured with an adhesive. This will prevent leaks and improve the comfort.

If your sliding patio doors aren't working as they should, it's essential to fix the issue as soon as possible to avoid further damage and keep them functional for a long time to come. Depending on the degree of the issue, DIY or professional repair/replacement may be the best solution.

Most problems with sliding patio doors are caused by dirty rollers, faulty tracks, and a loose handle. In most instances these issues can be fixed with regular maintenance and cleaning, which includes fluidizing the track, adjusting the rollers and tightening hardware. If these measures do not work, you should seek advice from a professional to ensure that your patio is functioning as it should. If you decide to replace or repair your patio door, be certain to verify its warranty information to make sure that it is covered under the manufacturer's guarantee. This will save you money in the future on repairs and replacements.