Sliding-Patio-Doors-Repair-Its-Not-As-Hard-As-You-Think-l

Sliding Patio Doors Repair

Sliding patio doors are ideal for enjoying your outdoor space, however they can become difficult to open or close. This can be caused by various issues like dirty tracks or a misaligned slider.

Start by cleaning and lubricating your rollers. You can also re-align the rollers using the adjustment holes that are located on the bottom side of the door panel that can be moved.

Dirty or damaged track

A damaged or dirty track can cause the door to not slide smoothly. Over time, dirt, grit, and even rust can build up, preventing the track to move smoothly. A gentle detergent and brush will suffice. It is recommended to complete this task regularly to ensure the smooth operation of your door and prevent the need for costly repairs later on.





A leaky door is a frequent issue that requires immediate attention to prevent water damage, mold growth and structural degradation. Most often, the issue is due to worn weather stripping and misaligned doors, which can be fixed by replacing the weather stripping and by aligning the door.

Another issue that is common and can be solved with a bit of DIY work is rollers that jump off the track. This can be a difficult task so you may need a helper to assist you. Stand inside the house, and lean a panel toward you to move the rollers. When the panel is lifted off the bottom track, it's time to place it on sawhorses in order to keep it from falling off. Then loosen the screws that keep each roller in place, and take them off with a screwdriver. It is now possible to remove any dirt that has accumulated between the wheel and the tracks. Clean each wheel by rubbing denatured alcohol on a rag. Reposition the wheels back to their tracks and attach them once more.

If a portion of the track is bent, it may be possible to straighten it by using a rubber mallet and block of wood. If the bent section is near hinges or has the potential to cause further damage, you should call in an expert.

Misaligned Rollers

If your sliding door isn't moving as it should it's because the roller wheels are misaligned with the track. The wheels could be dirty or rusted and their bearings wear down. This friction causes the door to become snagged and grind when opened or closed. This can also trigger squeaking sounds.

Fortunately, this is an easy fix. It is not necessary to take off the door to access the wheels since they are mounted on a bracket which is adjustable. Find the holes for adjustment (usually on the opposite side of the frame) and utilize a screwdriver for turning the screws that control the wheels. Turning the screw clockwise will raise the wheel, while turning it counterclockwise lowers it. Continue to adjust until the door is moving effortlessly and quietly when it is opened or closed.

It is crucial to adjust the wheel prior to making adjustments to your latch. To ensure that the lock functions properly, the latch hooks must be aligned with the strike plate. If you do not do this the latch could accidentally open or shut even when you're not in the room.

Sliding patio door are an investment. Making sure they are in good working order will keep your family safe. You can prevent costly repairs by fixing the most common issues, such as broken rollers, tracks and handles. For more help with your patio doors, call our team. We will assess your sliding patio door repair needs and assist you in keeping it in good shape. Our professionals can also help with any replacement parts you may need.

The door frame is damaged or damaged

Sliding patio doors make a fantastic option for any home and offer an attractive and convenient alternative to swing-open or hinged doors for patios. However, like any other hardware doors, they can experience various issues in time. Fortunately, most of these issues are easy to repair with a little DIY knowledge.

A gap in the frame is a common problem with sliding patio doors. It could be due to a number of factors, such as a an improperly aligned track or rollers, a damaged track or door, or a bowing door frame. Most of the time the reason for this issue is easily remedied by taking the door off and reattaching the track or rolling elements. It is important to be very careful not to damage either the frame or track.

In certain situations, it may be necessary to replace the entire track. This can be done easily with an universal replacement kit that is available at most major hardware stores. These kits are simple to install and will have your door functioning correctly in no time.

It is important to inspect your sliding door frame and hardware for signs of wear and tear, like loose bolts or screws. These can often be tightened using a screwdriver or wrench, making this an easy and effective DIY patio door maintenance procedure. It is also important to lubricate your tracks and rollers to ensure smooth operation and prevent premature wear.

Patio doors are often the primary entrance to the backyard and outdoor living area for a lot of homeowners. In order to maintain comfort and security in the home, it's crucial that they work properly. If you follow these easy DIY maintenance tips, homeowners can prolong the lifespan of their sliding patio door and reduce costly repairs or replacements.

A faulty handle

Sliding patio doors provide an ideal way to enter your backyard and also enter your home, but they can be difficult to operate if misaligned or damaged. A defective handle can cause the door not to open or close properly. The good part is that repairing a loose handle is a relatively simple task that can be done at home.

In most cases the loose grip is a result of screws that have fallen out of the backplate. To remedy this problem just tighten the two screws that are on the inside of the handle using the help of a screwdriver. If patio doors repairs notice that the handle is still loose, it may be a sign that the threads are worn and need to be replaced.

A broken latch may be the reason. This is more likely to occur if the latch is made of plastic, rather than metal. If the latch isn't turning or catching you can try oiling it first to see if it aids. If not, you might have to replace the lock entirely.

The handle, in turn, could become difficult to use when it is damaged or cracked. If this is the case, it will be necessary to replace it with a brand new handle that matches the style of your sliding patio door.

Feldco can help you restore your patio doors back to their former glory, whether they are brand new or old and old-fashioned. We have a variety of high-quality patio doors in various sizes and styles. To find out more about our doors, contact us now! We are proud to serve homeowners in Southern California, including Ventura County, Orange County & San Diego County.

Faulty weatherstripping

If you're seeing light around windows and doors that are closed or feel a draft pulling on the window or door It's time to change your weather stripping. These strips create a secure seal that keeps unwanted air, pests, and water from entering your home. It also helps keep your conditioned and heated air inside, saving you money on your energy bills all year long.

Based on the age of your weather stripping it may have deflated, and lost its bouncy, positive seal. It is easy to determine this by taking a dollar note and putting it through the seal between the top of the door frame as well as the at the bottom of the door jamb where they overlap. If the dollar bill slides effortlessly between the seal and the door is the time to replace the weather stripping.

If you only replace the worn-out part of the weather stripping, it could cause future problems with the seal. It's much more effective to replace the entire stripping, so that you can rest assured that your door is sealed again.

For an easy DIY project take a look at our weather stripping project guide to take off the old weather stripping and install the correct material on your sliding patio door and door frame to ensure a long-lasting solid, secure seal. This is a great way for you to save energy costs and repair your sliding patio door. Don't wait until its too late. You'll be able to reduce your expenses and enhance the look of your home.