Solutions-To-Issues-With-Double-Glazing-Lock-Repairs-r

Double Glazing Lock Repairs

The use of high-quality locks on your doors and windows helps to prevent burglars from getting into your home. They generally don't like breaking glass or trying to wiggle through windows that are open.

However, some double glazing owners have encountered problems with their door or window lock after it's been installed. These problems can often be solved without the need for a new double glazing.

Broken or damaged locks

If your uPVC door or window lock is broken or faulty or has a problem, a locksmith will fix it for you. They will be able to repair the striker plates, hinges, and locks on your double-glazed. They can also adjust the cylinder's position to correct any misalignment issues that may be causing your handle to not operate properly.

The mechanism could be seized when the key is inserted into the lock, but it does not turn or is difficult to insert. The dirt or grease could get stuck in the mechanism. If this is the case it is possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, such as graphite or teflon but not oil as oil can attract dirt and cause it to stick to the inside mechanism. After lubricating the lock, you should insert the key and then try to turn it. The lubricant should make through the mechanism and the lock should be able to rotate with ease.

Loose screws within the lock mechanism are a different cause of a faulty lock. They may loosen and fall out, or even break off completely, preventing the lock from being able to work properly. A screwdriver can be used to tighten these screws but it is important not to tighten them too much, because this could cause damage to internal components.

A damaged lock could be dangerous for you and your family, particularly if you have young children. They can easily unlock the door without your knowledge which gives them access to your house. If you're worried about this happening, then a vetted locksmith can provide rapid and effective service to secure your double glazing doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing that can fix all kinds of damaged and broken mechanisms handles, handles, cylinders, and lock systems on both uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your particular requirements, meaning that in most cases, replacement windows and doors are not necessary.

Handles that are broken or are damaged

As part of their overall security package most double-glazed windows feature a multipoint lock. This is an excellent option for those worried about criminals who are looking for ways to gain access to your home. Ask your installer about antilift blocks. They can be put in in addition to existing locks and can help keep your windows firmly shut.

It's not uncommon for handle locks to become damaged or even fail - they are the first part of your window that could be forced open by criminals who want to break into. Fortunately, the good news is that this is one of the most straightforward parts to fix.

Modern handles made of aluminium and uPVC feature a multi-point locking system called Espagnolette that is designed to resist forced entry. This security upgrade is often offered as an optional extra on new uPVC window installation. As an alternative upgrade older style aluminium or uPVC handles that are no longer in use can be upgraded to the shoot bolt locking system.

It is essential to fix handles as quickly as possible if it is damaged. A damaged handle can stop the window from closing properly and letting in a draft. It may be a weakness that burglars with a plethora of opportunities could exploit, putting your family and belongings at risk of theft.

To fix the malfunctioning mechanism, you must first gain access to the window frame, then take off the damaged handle. The gearbox is then accessed to identify the type of gearbox used to open the handle. This allows an alternative that is compatible with the profile and internal window frame mechanisms.

After the mechanism has been replaced, the handle may be returned to the original screws. We recommend replacing them with longer screws since they provide a more secure fit. The final step is to seal the handle using an opaque sealant. This will help protect it from further corrosion. After this step is completed your window will be fully functional again at a fraction the cost of replacing it.

Broken or Faulty Hinges

If your windows aren't shut correctly, draughts may get in, your home's security barriers will become weaker and you run an increased risk of water damage or damp. Window hinges that break or become faulty are a common occurrence and are easily fixed.

If you have a uPVC window that isn't able to open or close and close, it's likely that your hinges are damaged or broken and need to be replaced. While many window companies require you to purchase a whole new window to resolve this simple issue, we're able to replace the hinges that are damaged and save you money.

Window hinges can often break from repeated use or they might be damaged through rust over time. If you've got a broken window hinge, it is essential to take steps to prevent further damage. This means not causing the window to close or open.





The type of hinge you are looking for will help you identify the right parts to repair it. The most common kinds of window hinges include Maco, Mila, Roto and other brands. It's best to consult an expert in this regard so that you don't make the mistake of purchasing parts that are not compatible with your current hardware and cause further damage.

The hinges that are not working properly can be a huge problem for uPVC windows and doors. They can be a major source of noise, and they can also allow water to infiltrate your windows.

To fix this issue, first verify that the pin barrel on both sides of the hinge is aligned. If it isn't, tap the head pin with an hammer to create a small bend in the hinge barrel. This will help to keep the pin in place. Have a person hold the doors while you remove hinge screws and hinges. Replace the hinges and then install screws with glue. When the glue is drying, put a secure hold on the hinges using clamps or weights.

Once your hinges are repaired, you should be able to re-install the door and then reattach the handle. It is a good idea to replace the screws with the same length of dowels as the screw that was originally used so that they are in line with each the other.

Broken or faulty glass

uPVC Windows can become damaged in time, despite the fact they are great at keeping out the cold and retaining warmth. This can include damaged or broken glass and damaged locks. This is an issue that can be costly if not addressed. It also can detract from the aesthetics of your house and could lead to a loss of insulation, which is why it is essential to fix any damage as quickly as possible.

If the glass is cracked but not shattered it is usually possible to repair it yourself with the proper tools and techniques. Be sure that the area surrounding the broken glass is clear of debris so that any fragments don't cause injury or trip hazards. Then, take any broken pieces and dispose of them properly. Apply masking tape over the entire area. This will prevent glass fragments from sticking to your skin and scattering when you move them. If you're dealing with a double-paned window, it's a good idea to prepare the glass before glueing it back in place so that you are sure you'll have enough room to complete the task.

Before applying the glue, wipe the entire surface of the broken frame and the glass with a an unclean, dry cloth. Follow the curing and application directions that differ from one product to the next. You may need to clamp the broken glass with clamps made of lightweight materials designed to hold fragile materials, depending on the angle.

Once the adhesive has fully set, carefully place the glass in the window frame. Make sure that it is in line with the frame edge and that there aren't any gaps between the glass sash as well as the frame. Avoid bending the glass as you put it back in place because this could weaken the seal. This could lead to water infiltration or condensation.

Get in touch with a professional glazier, such as O'Brien(r) to arrange an exchange if your glass window is completely broken. It's important to act quickly in the event of broken glass.