Unquestionable-Evidence-That-You-Need-Double-Glazing-Door-Lock-Repairs-f

Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism started to fail? Perhaps the door or window handles aren't aligned properly or are difficult to use.

You'll be wasting energy when your double-glazed doors do not perform as they should. This also increases the risk of burglary. Owen the Locksmith will be able to repair your door lock at a reasonable cost.

Snapped Key

It can be frustrating when a key is snapped into the lock. It could also be a security risk since the door may not be locked and could leave you vulnerable to burglars. Fortunately, there are quick fixes that you can use to solve the issue and get your door functioning properly once more.

Keep calm. If you get scared and start doing a lot of fumbling around you could end up pushing the broken piece of the key even further into the lock, making the situation much worse.

Next spray WD-40 or a different penetrating oil into the lock to make the broken piece to slide out more easily. You can also make use of a screwdriver to break up any pieces stuck that might be hindering the flow. If you have a piece of the key stuck, grab it with the help of a paperclip or any other thin metal object and pull it. Both methods work, but be very careful not to push the broken piece of the key even further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades are also well for this. If you don't happen to have one of these tools, you can bend a hook with needle-nosed pliers. Finally, you can make use of a pair of tweezers to grasp and pull out the last piece of broken keys.

If you're unable to pull the broken piece of key out, try using a lock de-icer. It is available in most hardware stores and is used to freeze any moisture present within the lock.

If none of these strategies are working you, it's the time to contact locksmith. The experts at Fitlocks can quickly solve problems with uPVC door locks and mechanisms such as snapped keys and broken handles. They can also reconfigure your double glazing door mechanisms to make them more user-friendly. You can book an appointment online for a double-glazing repair or contact us to discuss your needs.

Broken Cylinder

A broken cylinder is an immediate security risk. A locksmith professional can fix the cylinder. To fix the cylinder, locksmiths will need to tap it. They can do this using a hammer or other tool, but the best way is to make use of a long match or piece of wire. Then, place the end of the match or wire close to the keyway. The locksmith can then strike the lock in order to crack it. This is far better than using a hammer that could cause damage to the lock.

Overheating is the main reason behind cylinder heads cracking. This can occur when the cylinder block and cylinder head are made of different metals, including cast iron and aluminum. Different metals can heat up and cool down at different rates. This could cause localized hotspots to expand more quickly than the rest of the cylinder.

Another possible cause for cylinder cracks is corrosion. If the cylinder block and head are not maintained correctly, they can corrosion or rust and cause them to expand faster than anticipated. As time passes, this may cause cracks.





If your uPVC window or door lock is brittle and requires more pressure to turn, it could be due to a variety of reasons. This issue could be caused by a faulty locking mechanism or misalignment or a worn-out handle.

Fortunately it is a simple and affordable fix for the majority of double glazing owners. A professional locksmith is able to solve the issue within one hour of arriving at your property. They can repair the locking mechanisms, or replace the window handles, and also change the gearboxes, based on the specific requirements of your home. A locksmith with experience can always advise you on the most cost-effective solutions for your home. They can even suggest upgrades to the highest-security 3 Star TS007 euro cylinders that will give you an additional layer of protection against burglars. This is a small price to pay for the security that comes from knowing your uPVC doors are safe.

Broken Handle

Window handle locks have complex mechanisms that become less effective with time and use, so it's no surprise that they can break. It isn't easy to determine the reason for a broken window handle lock and repair it correctly.

If the issue is related to the locking mechanism inside or the latch, fixing your broken handle will improve your uPVC double glazing door's security as well as help you stop draughts. Incorrectly repairing or replacing your handle can be expensive and can cause damage to the door's frame and lock and frame, so it's worth spending the time to do it right.

Screwdriver Open the window, loosen the screw holding the handle. The screw should be located on the inside of the backplate, usually concealed by a screw cap for aesthetic purposes. It is not recommended to lose any internal components of the handle like the levers and plates on either side. Keep them in the same arrangement to make it easier to replace them if needed.

Then, turn the handle to make it 90 degrees towards the window frame. Then, loosen the screw on the back of the handle that fixes it to the internal spindle by using a second screwdriver. Once the screw is free, you can pull the handle out and take out the broken spindle. Replace it with a new spindle, making sure it's the same length (you can find them online or in hardware stores). Securely screw it into the correct position. Don't over tighten the screw as this could damage the handle and the window frame.

Check that the new handle is fitted after which you can close and test the handle. It should work smoothly, and you will be able to open your window once again.

While double glazing near me working on the handle, be sure to ensure that your uPVC windows are shut properly. If they don't close correctly, you could encounter damp or draughts inside your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges on your window frames to ensure they close properly.

Broken Spindle

It is more typical for the spindle to break rather than the handle. This is particularly frequent in uPVC tilt and turn windows. These windows require a handle to operate a locking device in the frame of the window. The handle is attached to a central rod which activates mushroom-shaped locking cams that secure into the frame of the window keep. If the dead latch mechanism fails to open when the handle is turned, it is likely that the spindle has been damaged, this can be an extremely frustrating issue.

There are ways to fix this problem. A reputable locksmith can swiftly and efficiently solve the issue. They will be able to take apart the window handle using a tool that can remove the wheel portion of the mechanism that is where the spindle goes. This is done without damage to the handle or the window frame.

After removing More Bonuses , the technician can inspect the spindle and identify what caused it to break. This involves breaking the spindle into its individual parts and meticulously noting their general condition as in addition to any specific areas of wear or damage. This process is typically performed in a clean, well-lit room by highly skilled technicians.

Next, clean the damaged spindle. This will help get rid of any debris or dirt that could be hindering it from working normally. The spindle can be repaired or replaced. If it's being replaced, the technician could use an identical dowel size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the spindle fits perfectly with the handle.

If the spindle is damaged and cannot be repaired, it might require replacement completely. Home centers sell generic replacements, but if your window style is rare you'll require contacting an expert in woodworking or cabinet making who can recreate the exact component. After the spindle is installed, it is connected to the handle. Place the screw holes on the handle to the screws already in the frame. Once the new handle is installed, you are now ready to operate your uPVC window.