What-A-Weekly-Kia-Picanto-Key-Fob-Replacement-Project-Can-Change-Your-Life-q

How to Replace a Kia Sportage Replacement Key

For a number of Kia models keys, the key has a built-in keyless entry system. This key typically resembles the remote control and can be exchanged with a new one from a Kia dealer or a locksmith.

Key fobs can stop working due to a variety of reasons, including the battery being dead, worn-out buttons signal interference, or water damage. Here are some tips to help you get your Kia key fob that is a replacement for the sportage again.

How to replace the remote key or smart key

The battery inside your Kia's smart key will eventually require to be replaced, regardless of whether it's a remote as well as a push-to start key or a regular key that is not equipped with an electronic transponder. This is especially relevant if your car displays a message that the remote or smart key has low battery power.

This is a relatively simple procedure. To replace the keyfob battery remove your mechanical key from the slit that is located at the back of the fob. Then, pull the cover open. A small screw will be found inside the key fob to keep the battery in the correct position. Take out the old battery by unscrewing the screw using the help of a small screwdriver. Then, insert replacing kia key fob G28 and close the slit inside the key fob.

When the key fob is equipped with new batteries Test it by pressing the lock and unlock buttons. You're in good shape If the doors lock and unlock as expected. You can now take advantage of the hands-free lock/unlock feature on your Kia when your fingers start to get cold or you need to go on errands around Brandon.

Note: Certain key fobs might need to be programmed (transponder chips or smart keys). This requires a special programming machine that only the dealer or locksmith has access to. Other keys (non transponder metal keys) are not required for programming. If your key has to be reprogrammed, then you must be aware of the key code stamped on the key code tag and save it in a secure location.

How to replace a battery

If your Kia key fob isn't responding when you press the lock or unlock button on the fob, it is a good indicator that the battery should be replaced. A low battery can also cause other issues, like the check engine light flashing or the engine not cranking properly. Fortunately replacing the key fob battery is a relatively simple DIY project that requires only a few tools.

Make sure you turn off your vehicle and close all doors prior to starting. Find the small metal or a plastic piece that is located at the bottom of the key fob. Move it until the key falls out. Then, you can insert the key in the handle of the door for the driver to unlock your car.





To replace the key fob's battery, take off the rear cover and use a pry bar tool to release the latch that holds the black negative battery cable. Remove the old battery and align the new one in a way that the "+" positive side faces you, and the "negative" negative side is facing the fob's electrical contacts made of metal. Avoid using excessive force when pushing the new CR2032 into position to avoid damaging or bending the metal contacts.

After installing the new battery then turn the key fob on and off in the ignition until the door locks up. You can then test your Kia key fob and see whether it's working again.

How do you replace the smart key

You may have either an ordinary keyfob or Smart Key based upon the model of Kia Sportage. The smart key features an embedded mechanical key blade while the standard keyfob does not. Both types of key fobs have batteries inside that eventually will need to be replaced. It is a simple process that takes only two minutes.

Before you get started it is essential to ensure that you are on a level surface with good lighting and that your Kia is not on. Keep in mind that there are tiny pieces inside the fob which could be removed if not cautious.

The release button for the small size is located on the lower backside. It will be a circular or rectangular slot. You can open the key fob by pressing the button.

Once you have the key fob opened, you can simply remove the old battery, and replace it. The new battery is a CR-2032, and can be bought online or in your local auto parts store. Once you're done, your key fob should be able to lock and unlock your vehicle even if it's not running.

How to replace the mechanical key

The Kia key fob is a fantastic convenience that lets us lock and unlock our car at the touch of an button. But like any device it may have issues at times. There are solutions to address these issues and keep your key fobs in good working order for many years.

A dead or low-quality battery is among the most common issues. This can cause your device to stop working or work intermittently. If this happens then try replacing the battery with a fresh new one.

If this does not solve the problem, use a standard flathead screwdriver to wedge the fob's plastic casing open. Be careful not to damage any internal components, or scratch the plastic. After the battery has been removed then replace it with a brand new one.

After the new battery has been put in, close and open the doors with the mechanical key (every Kia fob comes with an emergency mechanical key that will fit into the slot). Test the key fob and ensure that it's working properly. If the key fob not working, contact an authorized locksmith or dealer to help solve the issue. Make sure they make you an emergency key that can work for all trunk and door cylinders to avoid lockouts in the future.